|
Sun, Dec 14, 08 at 21:52
| Appreciate any help on this issue. I have a Craftsman 1/2 HP Chain Drive opener and I have to hold down the inside buttom or the outside keyless entry the whole time to get the door to close. I realigned the sensors where both of them are on constantly and it still requires me to hold down the button the whole time. Remote will not work as a result.
The light on the wall of the garage is yellow and the other sensor's light is green. Interested in any thoughts on what the issue is. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Dec 15, 08 at 10:10
| If the main light on the opener turns on 10 times when you try to close the door it is a sensor problem. Make sure the light on each sensor is on and not flickering. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.