|
Wed, Dec 5, 07 at 21:11
| Our GDO has gone berzerk. It started with working intermittently with the remotes, but was working fine with the wall button. We tried changing batteries in remotes - no change. The green lights on sensors are steady, but the green light on back of main unit flickers constantly. Holding the green button down has no affect. Now garage door opens occasionally by itself, and when we push wall button, door opens, closes, reverses, etc. Even switching electrical wall switch on sometimes activates it. Tried unplugging GDO overnight - no luck. Does anyone know what is happening, or what we can try? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Dec 6, 07 at 17:39
| The little green light flickering is normal. If you can hold the green button in and it has no effect you have a bad logic board. It would normally erase the memory so that none of your remotes would work. I think all your problems are tied to this. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.