|
Tue, Dec 5, 06 at 18:32
| I need to reset my Craftsman Garage door key pad to a different code. I don't have the directions and need help. Could someone please explain.... |
Follow-Up Postings:
|
| If this is a wireless keypad that is presently working it is easy as 123. On the back of your motor unit near where all those white wires go you will find a button. Press and immediately release it, walk over to your keypad and key in a 4 digit PIN of your choice and then press enter. Should do it. |
|
| I seem to be having problems reprogramming my remotes and wireless keypad. #1, I lost the pin for the keypad. One of the remotes fell, and broke the case. I replaced the broken remote with the same sears# 139.53681B. I also replaced the keypad with the same sears# 139.53684 (black dot). Following all the different programming directions out here, and with the devices, I have had no luck. I can get only one of the remotes working, and never the keypad (either one). I have scoured the internet for additional info, and found none to work. What's my best solution? My opener is a '99 sears# 41A5021-3D, and works great - otherwise.The single button wallmount also works well. |
|
- Posted by Hueygod(raywebbh1fst@gmail.com) onThu, Apr 14, 11 at 17:40
| Worked as advertised. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.