|
Sun, Dec 14, 08 at 17:14
| model # 139.53681B
FCC# HBW1255 the wall unit works just fine.it looks like a doorbell. the light on it is green.
the remote does not work. i have replaced the battery,
how can i fix it... or can i? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Dec 15, 08 at 10:14
| If you have only one remote it makes it harder to diagnose but you can try programming it. First of all locate the smart/learn button on the rear of the opener near where all those white wires go. Then press and hold the large button on your remote while you press and immediately release the smart/learn button. If it works now that is fine but if not it can be a bad remote or a bad receiver on the logic board and only a technician can help you at this time. That is if you only have one remote. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.