|
Wed, Dec 26, 07 at 16:18
| My craftsman garage door when in the open postition to close hits the floor, pauses for a second and goes right back up. The garage door works fine in the manual position. Any thoughts on what the problems. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Dec 26, 07 at 16:30
| If the door hits the door too hard, the safety senses the door has run into something and reverses it to the open position. On the side of the motor unit you will find the 'down limit' control. Turn this a little in the opposite direction of the arrow printed on the cover. You may have to tweak it a bit to get it right. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.