|
Sun, Dec 2, 07 at 14:56
| I have a Craftsman 139.53644SRT garage door. The issue is when closeing it now goes all the way down, then stops then returns back up.
This happens about 3 or 4 time before it stays closed or you need to stop half way up then try cloesing it again. Anyone have the up/down adjustments in the manual. I can't find manual on line. Thanks in advance |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Dec 3, 07 at 16:17
| Try adjusting the down limit. You will find it on the side of the motor unit. Use a small screwdriver and turn the control in the opposite direction of the arrow printed on the cover. One turn will probably do the trick but you may have to play with it a bit. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.