|
Sun, Dec 10, 06 at 14:30
| Hi folks!
I have an older Lift Master "Pro-Line" 1/2hp GDO that will not close when you use the remote, but will close when you depress and hold down the wall button. This hapeens when it's cold, and not when it's warms. Is this an adjustment issue, or have the electronic board components changed value, thus requiring replacement? It's a Model #41a4252-6f. Also, how old do you think it is? Thanks! jjj |
Follow-Up Postings:
|
| Make sure the photo eyes are properly aligned. They will be either mounted on your vertical tracks or just to the left or right of the tracks. On that model you should have one that glows a bright orange or some say yellow and the other one should be green. If the orange eye is not on you could possibly have a bad circuit board and or photo eye. If it is orange and the other one is not green or is fluttering go over and loosen the screw and play with it until it glows a solid green. That unit is anywhere from 2-10 or 11 years old. I am not sure when they started using that frequency, but I know they just changed it again about 2 years ago. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.