Return to the Garages/Workshops Forum | Post a Follow-Up

Craftsman Garage Door Keypad and Wall Unit Problem

Posted by edbish (My Page) on
Tue, Dec 26, 06 at 14:11


I recently had a power outage. Everything stopped working. I was able to reprogram all the remotes but cannot get the wall unit or keypad to work. The wall unit just blinks green. I can't reset it and I can't reset the outside keypad. Any ideas on reprogramming both of these? Thanks!

Follow-Up Postings:

RE: Craftsman Garage Door Keypad and Wall Unit Problem

edbish, what you are describing is the opposite of what is a normal problem. Usually the remotes quit but the wall button and the keypad continue to work. The flashing green light on the wall button probably means the lock function is on. Hold the lock button in for 3 seconds and this flashing should stop. Post back please.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here