|
Tue, Dec 30, 08 at 11:04
| I have a Sears Craftsman garage opener. The remotes and the key pad opens the garage just fine; however, the door will not close with the remotes and I have to hold down the keypad ENTER button to cloe the garage (like an override). When I hit the remote to close the garage, the light just flicks on an off a few times and I hear clicking. Any idea on how to resolve this issue? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Dec 30, 08 at 12:34
| Most likely your door sensors have been bumped and are no longer pointing at one another. Align them and check. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.