|
Tue, Dec 9, 08 at 7:00
| ok i asked this question before , but got no response
does anyone know if you can have 2 keypads (you program 4 numbers on the pad while opener is in learn mode) does anyone know if 2 keypads can be programmed - i have to try this because i cannot get my clickers to work. thanks |
Follow-Up Postings:
|
- Posted by davidandkasie (My Page) on Tue, Dec 9, 08 at 12:09
| if they are wireless keypad then you program them no different than programming a remote. if they are wired, then you should be able to wire them in parallel to the existing switchs. you can also program 1 keypad to open/close both doors at the same time. the only problem with this is if 1 is open and 1 closed, when you activate the keypad they will simply swap positions. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.