|
Fri, Dec 4, 09 at 2:58
| Anyone know whether the Craftsman Garage Opener Drive Gear Kit (41A2817) includes the metal sleeve bearing located just under the sprocket ? This is the sleeve bearing located on the sprocket-end of the shaft, and requires removal of the C-Clip to get to. I know I could buy the 41C4220A kit that includes the sprocket and shaft, but all that needs replacing is that sleeve-bearing.
Thanks ! |
Follow-Up Postings:
|
- Posted by noel_desouza (My Page) on Fri, Dec 4, 09 at 3:39
| Used the wrong term in my original post. Replace 'sleeve bearing' with 'flange bushing' Thanks ! |
|
- Posted by don_1_2006 (My Page) on Fri, Dec 4, 09 at 16:43
| No it doesn't. |
|
- Posted by noel_desouza (My Page) on Tue, Jan 12, 10 at 5:37
| Thanks don_1_2006 ! I ended up ordering the entire gear, shaft and sprocket (41C4220A) because my sprocket flange bushing was toast. Turns out that the kit DOES include a flange bushing that could be used to replace the sprocket-bushing (maybe 41A2817 does to) - since both bushings on either end of that shaft are identical - and the kit includes one of them. However, I'm glad I ordered the shaft kit since it turned out my old shaft was worn down too near the sprocket-bushing area. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.