|
Fri, Dec 19, 08 at 0:04
| We have a Craftsman HBW1127 GDO. Our garage door was sticking on the way up so I adjusted the Up screw this AM and it went up & closed OK. When my wife got home this afternoon, it wouldn't open at all. We had to re-attach one of the cables on the garage door that had slipped off its pulley wheel to get the door to open evenly again. When we tried the GBO opener again, the motor only hums and won't turn the GDO gear chain. Does this mean I need to get a new gear for the motor or a whole new motor? What should I do now? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Dec 21, 08 at 15:54
| The fact you had to re-attach a cable means you have door problems. I would bite the bullet and get a technician out. They will correct all your problems. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.