|
Sat, Nov 1, 08 at 18:03
| Help me if you can,
I just installed a hand used garage door opener (Craftsman 1/2 HP with Red SRT Button)from my father. I know the remotes used to work when I took the opener down. Now i've reinstalled the opener at my house and the opener works fine using the wall mounted control (not a craftsman) from my original opener I had. However, I can not get the remotes to reprogram. I've bought new batteries and tried them in both remotes. The RED SRT Button does not blink as it supposed to. When I press it, it will stay on for about 10 seconds then shut off. Replacement remotes are about 40 bucks and I do not want to buy one if it still will not work and it is the main unit that is faulty. If anybody has any answers I would appreciate it. Thank You,
|
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Nov 2, 08 at 12:18
| This is the symptom of a bad logic board. |
|
| Thank You for your response. I feel I can now justify buying new opener. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.