|
Thu, Nov 20, 08 at 17:42
| Have a 1980s Liftmaster GDO & my son disconected it to repair the garage door. While it was disconected I accidentally pushed the button to the GDO & the motor ran all night. After hooking everything back up, the motor runs but nothing happens. Any help pointing us in the direction of the trouble is greatly appreciated! Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Fri, Nov 21, 08 at 16:57
| Take off the cover and check for a stripped gear. Be sure to unplug it first. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.