|
Tue, Nov 18, 08 at 17:40
| I am about to buy a new GDO to replace an old Stanley that has failed. In addition to the remotes in the cars, I have two wired controls - one is a button, one is a Stanley panel with a button. I also have an external keypad wired into the Stanley panel.
Will the wired controls work with current openers? Or will I need to replace them as well. I am looking at buying a Chamberlain. Thanks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Nov 18, 08 at 18:01
| Your new opener should come with everything you need with the possible exception of a keypad. The keypad may be extra depending on the model you get. I would use all new and discard the old just to prevent any future problems. Your choice of Chamberlain is a good one. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.