|
Sun, Nov 16, 08 at 17:33
| Ok.. I've got a Craftsman remote model 139.53681 and it used to work with my ANCIENT Overhead Door model 450a
The battery went dead and now after replacement I can't figure out how to reprogram the darn thing again. I can't find a transmit button on the old opener so... any ideas??? thanks.. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Nov 18, 08 at 11:34
| I am not familiar with your opener but you normally do not have to reprogram the remote because you replaced the battery. Actually you are not doing anything to the remote when you program. You are teaching the receiver to recognize the signal sent by the remote. I think either your receiver or the remote has quit working. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.