|
Wed, Nov 11, 09 at 16:56
| I have a one piece double garage door with a Sears garage door opener. It came with 2 remotes and an inside open/close button. I then installed a keypad outside and the remotes ceased working. I have reprogramed both the keypad and the remotes but can only get one or the other to work not both.
Any idea's |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Nov 11, 09 at 17:50
| You got the wrong keypad for your opener. Take the model number off the motor unit. It is on the opposite end of where all those white wires go. The keypad must be for that model opener or you will have that problem. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.