Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Sears GDO model 139.53930D and Keyless 139.53684

Posted by oldoneleg (My Page) on
Sat, Nov 24, 07 at 16:00

Both Craftsman units. Keyless has been operational for six+ years. GDO has been operational for 16 hours. Can't get the GDO to recognize the keyless entry.

Attempt four steps as outlined in GDO Owner's manual for using keyless entry, but all keyless entry does is blink. GDO does nothing. GDO has PURPLE "Learn" button and amber "Learn" light.

Tried new battery. Tried holding keyless entry right up to the GDO. Tried holding entry button on the keyless after inputting 4 digits; and while holding the 'Entry' button on the keyless, depressing the "Learn" button on the GDO. No joy. No blinking lights from the GDO.

Are these two units compatible? Where can I go online to see a compatibility chart?

Is there a Rosetta stone for making these two units work?

Car remotes work fine.


Follow-Up Postings:

 o
RE: Sears GDO model 139.53930D and Keyless 139.53684

I would call Sears and after giving them the model number of your opener ask what keypad is compatible. That information must be available to someone but it sure is hard to find. No Rosetta stone here.


 o
RE: Sears GDO model 139.53930D and Keyless 139.53684

Your new garage door opener is on a 315 mhz, the key pad that you are trying to use is not compatible with the new opener because they are on a 390 mhz. Sorry to say you need to purchase a new keyless entry with the new 315 MHZ system. The key pad that you need to purchase from Sears is: 139.53754


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here