Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Avoid Wayne Dalton

Posted by name_1 (My Page) on
Thu, Nov 23, 06 at 14:31

I would avoid Wayne Dalton. We have had both mechanical and programming problems. The disengagement cable snapped while trying to disengage the opener for reprogramming which is often required due to frequent failures. Simply touching the wrong button accidentally on the wall station can result in programming malfunction. It is difficult to reprogram; the units quickly go into "thermal overload" or on "vacation" (terms from the instruction manual). We have found it hard to reach call center support. You can be on hold for more than 10 minutes and when reached the support staff can be very impatient.


Follow-Up Postings:

 o
RE: Avoid Wayne Dalton

AMEN!!!


 o
RE: Avoid Wayne Dalton

Wow, sounds like you installed them yourself.

We paid to have them installed (wasn't cheap). 2 9' doors with I-drive. 2 years now - no problems at all.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here