|
Sun, Nov 22, 09 at 1:03
| Have a 1989 Sears GDO that allows the door to slip down a few inches after fully opening. Door is well balanced. No problems or hangups while operating. Any suggestions?
Thanks, Steve |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Nov 23, 09 at 10:21
| Disconnect the opener from the door and then raise it to the same position as the opener does and release it. Does the door stay put? Your door could be traveling too far in the up direction. Maybe after 20 years the opener is just tired. Yours is not a normal complaint. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.