|
Thu, Nov 2, 06 at 0:18
| I can't seem to get the gargage opener to accept more than 1 remote control. I have 2 remotes and one of them stopped working. I replaced the battery and still no good. The other one works just fine.
I can reprogram the remotes but it works on only one at a time. After programming the 1st remote successfully, adding another remote will not work. I made sure it isn't just one remote that's bad as I can erase the programming on the receiver and reprogram on the remote that wasn't working previously. Anyone know why it doesn't allow me to add a second remote to program? |
Follow-Up Postings:
|
| One of your remotes has reverted to an earlier technology. Sorry for what sounds like doubletalk but that is how the manufacturer explains it. You are stuck purchasing a new remote. Make sure it is the same model as what you have. When you get it programmed you will find that one of your existing remotes will work with it and the other will give you the same symptom you now have. Do yourself a favor and trash the problem child. It could give you more problems further down the road if you don't. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.