Return to the Garages/Workshops Forum | Post a Follow-Up

Steel entry/service door sizes--HELP!!

Posted by backemin (My Page) on
Sat, Oct 14, 06 at 23:23

I have an older 2 1/2 car garage with a 7 ft. ceiling height. That means it has a 6ft (72"x32") side service door.
The original door is wood and getting shabby. I would like to replace it with a steel door. I can't find a 72" steel door.
Any Ideas??

Follow-Up Postings:

RE: Steel entry/service door sizes--HELP!!

This can be special ordered at you local MegaHardware store. When I had a door opening in my walk-out basement poured, the shorted me 1/2" on the door rough opening. When I went to Home Depot, I was told that to special order the door 1/2 inch short would cost almost $200 more. I decided to try cutting into the bucking. But a special order steel door is available.

Moderate Mark

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here