|
Wed, Oct 24, 07 at 23:03
| I have a Craftsman model 53989 GDO that quit working altogether. I removed power from it for awhile and when I powered it back up, the lights come on and the door works properly for a few minutes. When the lights time out, the light on the control button goes out, as does the green receive eye indicator, and nothing works. Is there anything I can check, or do I have a bad logic board. Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Oct 25, 07 at 17:06
| It sure sounds like a logic board. |
|
| Have a wither home with 2 openers. Was away for 5 months. Came back & key pads did not worl & only 1 opener out of 4 worked on one door.Changed all bateries & still same. Got key pad to reprogram on large door & got 1 remote to do same on large door. Can't get any thing but wall button to work on small door. Help |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.