|
Fri, Oct 26, 07 at 22:27
| I have a craftsman 139.5366srt2 and the remote stopped working. I changed the batteries and reprogrammed. I can get the remotes to work OR the keyless entry but I can not get them to work at the same time. It seems like when I program one it erases the code on the other. But they used to all work.
Any ideas? |
Follow-Up Postings:
|
| I just started having the exact same problem yesterday. When I began, I was attempting to reprogram one hand-held remote as well as the keyless entry pad. I tried so many things I can no longer remember everything I did nor the order in which I did them. At this point, I can get either the hand-held remotes to work or the keyless entry, but not both at the same time. I read something in another post about the hand-held possibly reverting to "old technology", which appeared to mean that it would no longer support rolling codes, but only support static codes. Could this be true and could it be the source of the problem? |
|
| I have the exact same problem. Had to buy a new keypad...once I programmed it the remotes were erased. I programmed the remotes and now the keypad doesn't work.. |
|
- Posted by don_1_2006 (My Page) on Mon, Oct 29, 07 at 14:27
| Sounds like you all are having problems with a unit that has reverted to the earlier technology. The problem is finding the one that is bad. If you have 2 or more remotes that work but your keypad doesn't then I would suspect the keypad. You must make sure you get the correct keypad or you will have the same problem all over again. disney1 I think you were sold the wrong keypad. |
|
| So has anyone figured it out yet? We are just using the key pad but I want to get it figured out before the snow flies. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.