|
Sat, Oct 23, 10 at 21:57
| I have a cratfsman garage door which opens with one click of a button on my remote as well as mount wall button. However, when i close my garage door, i cannot do it with my remote, and i have to HOLD down the wall mount button until it shuts down completely and release it as soon as it hits the ground. for a newbie, if the timing is not right, then the door will not close, rather it will start opening again.
Can someone please teach me how to set up my door to close with one click on the remote. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Oct 25, 10 at 9:34
| If when the door reverses the main lights flash 10 times it is a problem with the door sensors. Make sure the small light on each one is lit and not flickering. Tweak them a bit. If you cannot get both lights to come on you have either bad sensors or bad wiring. |
|
| I dont have door sensors installed on my garage door at all. Do you think that it the problem ? |
|
- Posted by don_1_2006 (My Page) on Wed, Oct 27, 10 at 9:31
| If your opener came with door sensors you must install them or it will not work correctly. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.