Return to the Garages/Workshops Forum | Post a Follow-Up

Program Garage Door Keypad

Posted by jhanger (My Page) on
Mon, Oct 9, 06 at 21:48

My house has a Craftsman 1/2 HP GDO, Model #139.53976SRT. I have no manual. How do I program the keypad? The previous owner said she never programmed it. One of my remotes also does not work. How do I reprogram it??

Follow-Up Postings:

RE: Program Garage Door Keypad

If the remote and the keypad are compatible to the opener you can do this.

Find the smart/learn button on the back of the motor unit near where all those white wires go. You may have to remove a light lens.

First the remote.

Press and hold the button on the remote while you press and immediately release the smart/learn button.

Now the keypad.

Press and immediately release the smart/learn button and then walk over to the keypad and key in any 4 digit number and press enter.

Should do it for you.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here