|
Wed, Oct 17, 07 at 20:37
| Just replaced a craftsman 1/2hp garage door opener (about 8years old) with another 1/2hp unit. Replaced the motor/drive only as everything else was working fine.
New one button remote works fine but when I try to reprogram the 2, old, 3 button remotes nothing happens. The touch pad also is unable to be reprogrammed. Please tell me I don't have to purchase new touch pad and remotes. Any ideas welcome. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Fri, Oct 19, 07 at 18:58
| I think you are the victim of a radio frequency change. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.