|
Mon, Oct 22, 07 at 20:25
| I have recently moved into a rental. The previous renter didn't pass on the 4 digit code for the keyless entry. Is there a way to reset the code without the existing code? Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Oct 23, 07 at 14:52
| On the rear of your motor unit near where all those white wires go you will find the smart/learn button. Press and immediately release this and then walk over to your keypad, key in your new 4 digit code and press enter. You should be set if everything is working. |
|
| Worked like a champ, thanks. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.