|
Tue, Oct 23, 12 at 20:09
| I have a pioneer 1073 chainsaw just put in new breaker points and set them . Started it it ran about two seconds then died and would start back. I have not started it for couple of years i was trying to find the points. I had drained the gas and oil out of it. It says 16: 1 on the fuel mix and that what I mixed it. I hate to take the carb apart its a bear you have to split the saw apart. Any short cuts to clean out the carb? |
Follow-Up Postings:
|
| While this is my first visit to this forum, as a eight year visitor to Gardenweb, let me suggest that this question is posted in the wrong forum. The correct forum would be Tool Shed. While you might get a helpful reply, your changes are much better in a forum devoted to a particular subject. Also it tends to irritate the regular forum users. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.