|
Sat, Oct 18, 08 at 19:36
| My gears were worn out on my Sears Crafstman chain garage door opener. I have replaced them and put it back together correctly. I think. After I put it back together, the first thing the opener does is try to go down. It will then go open about 6 inches. Try it again it does the same thing. Don't know what else to try. I don't know if there is a reset on this or not |
Follow-Up Postings:
|
| Your motor is probably in the reverse position, try unhooking the chain let the motor run so the sprocket runs in a clockwise position and then hook up chain again. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.