|
Sat, Oct 23, 10 at 17:46
| Hi,
I installed a new Craftsman GDO #139.53918D 3 months ago. For the last 3 weeks, the door has been stopping mid way up or down. I have reprogrammed each remote and wall unit, but the door only works a few times before stopping mid way again. After the door stops, the remotes will not work for several hours. I called the teh 800 number. They stated that the problem sounds like it is due to the logic board. They are sending a new one. Does it sound like the logic board is causing this problem? Is the board easy to switch out? Does anyone have instructions on how to do this, and a link to a website? Thanks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Oct 25, 10 at 9:42
| You need to release the door from the opener and operate it by hand. Is there a point where the door is binding? Review the instructions in your manual for up and down force adjustments. When the remotes won't work for several hours points to the logic board. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.