|
Mon, Oct 10, 11 at 14:19
| I have a Craftsman gdo that is driving me crazy. It is a 1/2 hp model # 139.18452D. The unit will open the door most times, but when closing the door will go down a foot or so and then no power. If you tap the gdo it gets power again. It takes a few times to get the door down. I haven't noticed this problem posted. Any suggestions? Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Oct 10, 11 at 16:20
| What you need to do is pull the logic board from the motor unit and look for loose connections on the printed circuit board. Look closely around the small transformer. Make sure the screws are tight on the rear of the motor unit that secure those white wires. Now I am assuming that when you say "the door will go down a foot or so and then no power" that the door is just stopping at that point and not reversing to the open position. If my assumption is wrong we are looking at another problem. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.