|
Thu, Oct 30, 08 at 13:44
| My Sears Keyless Entry Pad stopped working properly. I changed the battery but the unit still is not working. It will not take my code, just flashes a bunch and then stops with no results. Any suggestions? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Oct 30, 08 at 14:04
| If it just quit working and a new battery didn't help I think it has just quit. You might try reprogramming it just to make sure. Press and immediately release the smart/learn button on the rear of the motor unit. Walk over and key in your code and press enter. If it still doesn't work and you are sure the battery is good you will need to replace it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.