|
Wed, Oct 29, 08 at 13:13
| I have a 3/4 HP Craftsman Garage Door Opener that is one year old and all of the remotes have stoped working. I was able to reset the codes on the outside keypad a few times and it would work for awhile, then it would stop. Now even when I reset the codes the opener will not work. The main pad works but not the outside keypad or the car remote.
Can someone please help. Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Oct 29, 08 at 14:37
| It sounds like the receiver on the logic board has quit. The wall control works like a door bell and doesn't need the receiver. The other units do. |
|
| Thanks Don |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.