|
Sun, Oct 25, 09 at 12:23
| the garage door will not open or close.. when i push the opener button it goes up 3 inches and then back down... i had the cover off the controls and i appears to be a relay in the control panel(logic board) . does anyone have any other ideas.. maybe a different way of troubleshoot. i appreciate any assistance .. thanks in advance |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Oct 25, 09 at 14:32
| Take a good look at your door springs and also the drive gear which is white nylon and is just in front of the motor. It will not be a relay. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.