|
Sun, Oct 14, 07 at 12:20
| I have just moved into a house were the garage door had some minor damage to the top panel so the opener wasn't being used. I repaired the panel and found going up is very smooth, but as it goes down the door starts jerking. not violently but not a smooth operation. Is this due to an adjustment some were? I have no manual or other instructions. this unit is a chain drive. I fear this could result in more damage to the panel if not corrected.
any suggestions? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Oct 15, 07 at 16:27
| It sounds like you have a door problem rather than an opener problem. Lubricate your hardware and try opening and closing by hand. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.