|
Sun, Oct 21, 07 at 11:59
| I am also looking to replace 2 old wooden garage doors and in talking with the nearest garage door company in my area, he mentioned the Garaga door. He also carried the Wayne Dalton and others, but really endorsed this door. It is made in Canada, and the Standard+ insulated door has the following specs: 26 gauge galvanized steel (G-60, Z-180) with 5 coats of protective finish applied in the factory. It comes with a baked on polyester based paint, primer, galvanization, steel, galvanization, primer. It has an R-16 pressure injected polyurethane foam center, wood end blocks to create a thermal break and flexible "U" weatherstripping on the floor. It says nothing about the top of the door. It also has interlocking weatherstripping between the sections of the door. Their website is www.garaga.com and it comes with a "limited" (my quotes) lifetime warranty. Hope this is helpful and would appreciate any additional info/feelings you may have. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.