|
Sat, Oct 24, 09 at 9:29
| I replaced batteries, no luck, I bought a new remote, programmed it and no luck, the wall unit works fine opening and closing. Is it the remote sensors? Where are they aand how do I test/fix them? Any other suggestions? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sat, Oct 24, 09 at 16:01
| Make sure the light in the wall unit is not blinking. If it is press and hold the button with the lock icon for 3 seconds. The sensors will not prevent the remote from working. Make sure you got the correct remote for your opener. It is easy to get the wrong one. The model number for your opener is on the opposite end of where all those white wires go and starts with 139. Use it when you need parts. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.