|
Thu, Oct 1, 09 at 0:30
| I've got an older Genie opener - don't know the model number, but it says "Genie Professional Automatic Door Opener System" on the unit.
The unit recently picked up a bad habit - it stops randomly part way thru opening or closing. It just "turns off" - no lights, no clicks, no screeches, no nothing. It's like it gets unplugged. If I knock on the box a bit, sometimes it starts again and works fine. Then it will stop for a minute or an hour or a week. I've checked the electrical connection and it's got power. Any ideas would help - even just finding where to look for the model number of the unit. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Oct 1, 09 at 16:59
| Can't help you with the model number but it sure sounds like you have a bad connection on one of the printed circuit boards. I would pull them and look for loose connections especially around the small transformer. You will need to be able to solder if you find it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.