Return to the Garages/Workshops Forum | Post a Follow-Up

 o
How to repair concrete threshold into garage??

Posted by radaar (My Page) on
Sun, Sep 28, 08 at 23:13

I'm not sure if this is the right forum for our problem but here goes....our driveway is a bit steep going up to the garage. The driveway is asphalt butting up to the concrete threshold entering the garage. The concrete threshold or whatever its called, is broken and crumbling. We had it repaired by a concrete resurfacing company once and it didn't even last the first winter. They did remove it and replace the concrete but we don't know if they reinforced it with rebar or not. We are wondering now if we should dig it all out and use asphalt repair instead of the concrete. Any thoughts or advice on this?? Thanks in advance for any feedback.


Follow-Up Postings:

 o
RE: How to repair concrete threshold into garage??

REPLACE don't repair. Not a big job, even if you have never done your own concrete before. In my area, a rental mixer is $20/day and 80# bags of pre-mixed cement are $3.55/bag. A two man job, easily done in a day. What's the size of the area you wish to replace??


 o
RE: How to repair concrete threshold into garage??

There are stronger and quicker drying cement formulas that will hold up and do not need to be a minimum of 4 inches to withstand pressures of a vehicle. Unfortunately the people you hired used the wrong material. We have a few different formulations to play with. Most are either polymer modifyed or cementitious urethane systems that are 5 to 10 times stronger than concrete alone. You need to find a seamless flooring systems company or concrete restoration company. Masons usually do not work witht this kind of materials.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here