Return to the Garages/Workshops Forum | Post a Follow-Up

 o
sears garage door opener

Posted by fionaroundabout (My Page) on
Wed, Sep 12, 07 at 19:48

I have a 1/2 hp craftsman door opener bought a year and half ago. The door works fine opening, but needs repeated pushing of the remotes or wall button for it to close. The track. spring and rest of the assembly seems fine.

I have double garage doors and I just had the spring replaced in the other door. The service man suggested that my logic board was cooked on the door that was not working properly. Since the door opener is only year and half old, I contacted sears.The motor is guaranteed for 6 years but not the logic board.

I tested the smart board and the light stayed on, there was no flashing to correspong to the diagnostic chart in the manual. I also obsevered that the safety sensor lights are operating properly.

Any suggestions.

Thanks


Follow-Up Postings:

 o
RE: sears garage door opener

On the end of your motor unit near where all those white wires go you will find the 'down force' control. Turn that about 1/4 turn and give it a try.


 o
RE: sears garage door opener

I also had a similar problem with my Sears Craftsman garage door opener. While Sears said the part may be covered by warranty, it would cost $65 for them to get it done. I am considering filing a class action lawsuit against Sears. If you would like more information on joining the class, please email a summary of your experience with Sears and/or the garage door opener, along with your contact information: name, tele. no., e-mail address. Thanks, Mitchell Rait. mrait@comcast.net


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here