Return to the Garages/Workshops Forum | Post a Follow-Up

car problem

Posted by pberm1962 (My Page) on
Thu, Sep 13, 07 at 19:10

I own a 2000 Buick Century and recently discovered that my wiper fluid won't shoot out when I use the controls. I dont have voltage on the end of the connector when i press the button and read it wit a voltmeter. i also cant get the pump to run when i apply 12 volts directly to its leads. it is reading about 3 ohms across its leads with a ohm meter. any suggestions? thank you paul

Follow-Up Postings:

RE: car problem

Make sure all the contacts are clean all along the line, the fuse is good, and the switch activating it functions.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here