|
Wed, Sep 30, 09 at 13:09
| This is a Craftsman 1/2hp 139.53636SRT opener. I would like to change the code on the outdoor mounted wireless keypad. There are no instructions in the owners manual..
Thanks! |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Sep 30, 09 at 14:15
| On the back of the motor unit just to the left of where all those white wires go you will find the smart/learn button. Press and immediately release this and then walk over to your keypad and key in any 4 digit code you like and press enter. |
|
- Posted by robert2001 (My Page) on Wed, Sep 30, 09 at 16:18
| YES!! That green button is called the SRT button. Thank you! I was able to change the entry code on the keypad no problem. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.