|
Tue, Sep 25, 07 at 11:35
| If anyone out there has an owner's manual for a Craftsman 1/2 HP Garage door opener model 130.536XXXX I am in desperate need of your assistance. We purchased a home 2 yrs ago with this GDO and previous owners did not leave the manual. We have the keyless entry pad and two remotes for our cars and have NO CLUE how to program the keypad to open the door.
The opener itself is working very well, thank you. Although after going through the hundreds of posts on this Forum I must say we feel like "the lucky few" in that regard. Thanks in advance for your help! |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Sep 25, 07 at 14:57
| On the rear of your motor unit near where all those white wires go you will find the smart/learn button. Press and immediately release this and walk over to your keypad and key in any 4 digit code you like. Then press enter. Should do you. By the by, Sears has sold millions of these openers. There are several "lucky few" out there. |
|
| will try your suggestion tonight, don_1_2006. Saw that button and wondered what it did. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.