|
Fri, Sep 22, 06 at 11:28
| The unit is 5 yrs. old and has worked fine. It still works fine with the exception of the light. It quit coming on upon opening and closing. Tried 2 new bulbs, no luck. The light will not come on even when you trip the sensors. I also noticed the small red or yellow light on the back of the actual motor unit is no longer on. This used to be on 7/24. Anybody have any ideas? |
Follow-Up Postings:
|
| I'm not sure this is the answer to your problem but try holding the light button in for 10 seconds on the wall control. This will normally toggle the feature where the light comes on when you interrupt the sensors. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.