|
Thu, Sep 29, 11 at 11:24
| I have a Sears garage door opener 1/2 horse with keyless remote. It will not open with any of my remotes but it will SOMETIMES close with them. It also has a hard wired door opener that works all the time. It does not matter what time of day or what the temperature is they just will not work. This has been going on for some time and I have been making do with the hard wired unit.
I replaced all the batteries in the remotes. I tried reprogamming the remotes but it still does the same thing. The antenna wire is in the same position it was when the remotes were working and all connections appear to be good. As a last resort I unplugged the unit for ten minutes and plugged it back in. Results were the same. I did not think that would work in this case but figured it was worth a try. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Sep 29, 11 at 16:20
| Sounds like your receiver has quit. Hard wired wall control and keypad doesn't use it so it keeps working. Time for a new opener. That one is old and outdated anyway. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.