|
Thu, Sep 17, 09 at 11:04
| The sensors on our Craftsman 3/4HP are not working so to close the garage door we have to push and hold the button down (can not close the door with the remote). There is nothing lit up on either of the sensors (no green or yellow lights), almost like the sensors have gone out or they are not getting power. Any suggestions on how to fix this problem? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Sep 17, 09 at 14:59
| If you have had electrical storms it is most likely your logic board has taken a hit but check the wiring from the motor unit to the sensors. You could have a broken wire. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.