Return to the Garages/Workshops Forum | Post a Follow-Up

Lift Master 1/2 hp won't go down w/o help

Posted by tulsaag (My Page) on
Sun, Sep 5, 10 at 10:26

I have Liftmaster Professional 1/2hp if you put door down it goes down for a second then light start blinking and door stops. If I hold the button on the wall down until the door reaches the floor then the door goes down and stays down. The door goes up fine. Any suggestions? Just had both springs replaced. If you disconnect door the opener does the same thing, so we don't think it is the door.

Follow-Up Postings:

RE: Lift Master 1/2 hp won't go down w/o help

Check your door sensors for proper alignment. Each of them has a small light that will be lit when they are pointed at one another. If both lights will not come on you have a bad sensor or bad wiring to them.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here