|
Mon, Aug 17, 09 at 23:10
| I have a 3 button sears garage door opener (HBW1D3469). It says in the instructions that I can program one of the extra buttons to open a second garage door - which would be great because I have two independant doors. However, instructions then say to set dip switches to match the switches on the back of the opener itself - which I did. Voila, it opens my garage door. Question is, how do I program it to open the other door, which has switches set in a completely different pattern??? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Aug 18, 09 at 9:43
| Open the case and see if there is an additional set of dip switches inside. These will then need to be set to match the switches on the 2nd door opener. |
|
- Posted by cubanredneck (My Page) on Sat, Aug 22, 09 at 21:50
| My neighbor opens my GDO with her trans.so I need to reprogram my GDO unit & trans.but I dont have a clue on how to go about it.I have a Craftsman GDO with a red smart button in the rear of the unit & my transmeters have switch sticks. |
|
- Posted by don_1_2006 (My Page) on Mon, Aug 24, 09 at 10:25
| If you mean your transmitters have dip switches it is an easy job. Change any or all switches on your remotes remembering they must match. Now take any remote and hold the button down while you press and immediately release the smart button. Your remotes should all work now if they all have dip switches and were all set the same. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.