|
Tue, Aug 15, 06 at 22:04
| I have a Craftsman Garage Door Opener. It has been working fine, but now none of my remote openers will close the door. They all open it, but will not close it. Any ideas? |
Follow-Up Postings:
|
| If your door starts to close and then reverses to the open position it is usually the sensors in the doorway have been bumped and misaligned. They must be pointed at one another for it to work. Each has a small light that should be on and not blinking. Tweak them until it works. |
|
- Posted by trytobehandy (My Page) on Wed, Aug 16, 06 at 23:13
| Unfortunately, it works fine with the button on the wall, which tells me they are aligned. I did try moving them around without success. All it did was prevent the wall button from working. Any other ideas? |
|
| You say your remotes will open the door but will not close it. What does it do when you try to close it with a remote? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.